Click image to view full size image
Model Number: KL120L
Key Specifications/Special Features:
KL120L mini roller driven pellet millThis machine new designed in 2015. Vertical style is very easy to put it here and there.These pellet machines are the new designed products of our company and the main parts of the fodder machinery system. Now this animal feed pellet machine is mainly used to make feed pellets for rabbit, pigeon, layer chicken, broiler, duck, goose, fish, pig and so on. The key parts are made of alloy steel that make it very strong and malleable. Now our machines have been exported to Western Europe, North America, Southern Europe, Eastern Europe Asia Africa and so on.Main Features1. This series machine can be powered by both diesel engine and e-motor.2 .We adopt the new design of direct connection of motor shaft and his main shaft that overcome the loose defect of belt connecting as long time using.3. High accuracy gearbox and high output.4. It is widely used in large, middle, small scale aquatic. Food and feed processing factory,livestock farm, poultry farm, individual raisers, middle and small farm.
5. International advance steam fittings and imported pressure reduction valve.
6. Flat die is made with international advanced equipment for long lifespan.
7. Drive with heavy duty gearbox, which can produce continuously in most adverse condition.
The terms of warranty and spare parts
Our pellet mills are guaranteed with 1 year quality assurance from the date of goods shipment.
When we are talking about spare parts for a pellet mill, by and large, we are talking about die, roller and bearing. Practically, that how often you will need to renew spare parts is depending on what raw material you are making pellets from. Apparently, compared with making straw pellets, pellet mill that are making wood pellets requires a higher frequency for changing spare parts. We supply clients with high quality pellet mill dies, rollers, bearings and other parts. Clients are available to order at anytime. If you need spare parts, please contact me or test message.
What could I do if the pellet mill can't produce pellets?
A: New flat die pellet mill in first use may not produce pellets, because of the low smoothness of mould and bad cooperation in new devices. After using oily material for a period, the pellet machine can run smoothly.
B: The clearance between rollers and dies is too large. You can tighten the screw to narrow the gap to 1.5-2.5 mm.
C: Necessary steps to update a new die or roller shell because of wear and tear caused by long-term service.
D: The material is too wet or too dry, resulting in low productivity. You’d better increase or decrease the moisture to proper rate, generally 13%-16% in raw material.
CE certification and service
Our pellet machine all have CE certification.
As 24/7 email and phone call
5. International advance steam fittings and imported pressure reduction valve.
6. Flat die is made with international advanced equipment for long lifespan.
7. Drive with heavy duty gearbox, which can produce continuously in most adverse condition.
The terms of warranty and spare parts
Our pellet mills are guaranteed with 1 year quality assurance from the date of goods shipment.
When we are talking about spare parts for a pellet mill, by and large, we are talking about die, roller and bearing. Practically, that how often you will need to renew spare parts is depending on what raw material you are making pellets from. Apparently, compared with making straw pellets, pellet mill that are making wood pellets requires a higher frequency for changing spare parts. We supply clients with high quality pellet mill dies, rollers, bearings and other parts. Clients are available to order at anytime. If you need spare parts, please contact me or test message.
What could I do if the pellet mill can't produce pellets?
A: New flat die pellet mill in first use may not produce pellets, because of the low smoothness of mould and bad cooperation in new devices. After using oily material for a period, the pellet machine can run smoothly.
B: The clearance between rollers and dies is too large. You can tighten the screw to narrow the gap to 1.5-2.5 mm.
C: Necessary steps to update a new die or roller shell because of wear and tear caused by long-term service.
D: The material is too wet or too dry, resulting in low productivity. You’d better increase or decrease the moisture to proper rate, generally 13%-16% in raw material.
CE certification and service
Our pellet machine all have CE certification.
As 24/7 email and phone call
| Model | power | die hole size | capacity | packing size |
| KL120L | 1.5kw | 2.5-10mm | 50-80kg/h | 60*43*100cm |
| KL120L | 2.2kw | 2.5-10mm | 60-100kg/h | 60*46*100cm |
| KL150L | 4kw | 2.5-10mm | 90-120kg/h | 60*51*105cm |
Shipping Information:
- FOB Port: Qingdao
- Lead Time: 7 - 15 days
- Dimensions per Unit: 100 × 46 × 90 Centimeters
- Weight per Unit: 230 Kilograms
- Units per Export Carton: 1
- Export Carton Dimensions L/W/H: 100 × 46 × 90 Centimeters
- Export Carton Weight: 230 Kilograms
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe